Handheld Digital Scope Meter

1. The auto set function, continuously fully automatic adjustment of amplitude range
and time base
2. Waveforms and waveform parameters can be displayed on the screen at the same time; the users can choose parameters (such as RMS, peak to peak, means, frequency, period and so on) according to their needs
3. With 100msa/s real time sampling rate each channel and 20MHz bandwidth; it can quickly and factually reflect the waveform state and catch the fault impulse with
the least breadth of 10ns
4. Save and recall function; it can save six groups of waveform data and ten groups
of parameter setups
5. High distinguishable crystal display; it can display the details of the waveform distinctly
6. With compact, convenient, full functional operating menu
7. It can be portable with lighter, smaller, only 0. 7kg weight
8. Supplied with Ni-battery; it can be used under all kinds of environment conveniently

Bandwidth: 20MHz (real time bandwidth)
Channel number: 2
Raise time: 17.5ns
Sampling rate: 100msa/s
Horizontal sensitivity: 10ns/div-5s/div, with 1-2-5 steps
Horizontal precision: 0.01%+1pixel
Horizontal distinguishability: 10ns
Vertical sensitivity: 5MV/div-20V/div, with 1-2-5 steps
Vertical precision: (5%+1 pixel)
Vertical distinguishability: 8 bits
Maximum input voltage: 300vp-p (bnc)
Trigger mode: normal, auto, single
Cursor measure: horizon, verticality
Screen display: 80mm x 60mm screen; 320 dots x 240 dots backlight adjustable display
Mode: dots display, vectors display
Save: 6 groups of waveforms and 10 groups of parameters
Channel isolation: >100:1